GLASS-FIXED 3923985 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     180-3033     Stand     2    
Engage the parking brake. Place wooden wedges in front of the drum assembly and behind the drum assembly.
Illustration 1 g00827930
Raise the rear of the machine until the tires are off the floor. Install Tooling (A) under the front of the rear frame of the machine, as shown.
Remove lug nuts (2). Use two persons in order to remove the wheel and tire assembly (1). The weight of the wheel and tire assembly is 100 kg (220 lb).
Repeat Step 3 in order to remove the other wheel and tire assembly.Installation Procedure
Check the condition of the wheel studs. If the studs are damaged use new Caterpillar parts for replacement.
Illustration 2 g00827930
Use two persons in order to install the wheel and tire assembly (2). Install lug nuts (1). Tighten the lug nuts to a torque of 530 70 N m (390 51 lb ft).
Repeat Step 2 in order to install the other wheel and tire assembly.
Raise the rear of the machine. Remove Tooling (A) and lower the machine.