GLASS 4I6859 - Caterpillar

4. Fill in the requested information for inquiry options (A) or (B) according to the directions given. [Both options (A and B) are shown.]Press the ENTER key.5. The necessary sea trial data now begins to appear with the screen that follows. Use this data as needed.6. Press ENTER to continue to the next screen.7. Press ENTER to continue to the next screen.8. Press ENTER to continue to the next screen.9. Press ENTER to continue to the next screen.Engine History Information
1. Use the dealer terminal system to bring the ENGINE TECHNICAL DATA SYSTEM program onto the screen.2. Proceed to the MENU screen as shown.3. In this instance, put an "s" in front of PGM. NUM. (PROGRAM NUMBER) "18" for ENGINE HISTORY INFO as shown.Press the ENTER key.4. Fill in the requested information for the inquiry options as shown according to the directions given.Press the ENTER key.5. The requested data now begins to appear on the screen as shown. Use this data as needed.Conversion Factors
In the event that conversion factors are needed when working with the CAMPAR program. Put an "s" in front of PGM. NUM. (PROGRAM NUMBER) "01" MKTG CONVER FACTORS.Press the ENTER key.Follow the procedure described to view the conversion factor table(s) that are needed.Using the Caterpillar Computer Aided Marine Par (CAMPAR) Program
1. Load your personal computer (PC) with the CAMPAR program.2. Proceed to the MENU screen as shown.3. Enter the desired option number between the brackets. [In this example, a "1" is inserted between the brackets for Marine PAR Performance Specification Verification.]Press the ENTER key.4. On this screen enter the desired option number between the brackets. [In this option the number "2" has been chosen.]5. As shown in the illustration, the information requested was for a new engine that is not as yet in the file. For assistance, call Caterpillar Inc. at the number given.6. Enter the word "SPEC" at the location indicated to return to the Performance Specification Menu as shown in the illustration that follows.7. Use the examples that follow as a guide and fill in the needed information on the screens for the new engine rating. Use the directions on each screen to proceed to each succeeding screen.BP/BP1 Correction Factors
Use the BP/BP1 Correction Factor given in either of these charts according to the engine with which you are working. If the correction factor required is not listed, refer to the topic entitled BP/BP1 Calculation Procedure for the formula to calculate and arrive at the correction factor needed.In the event that the correction factor needed is not in either of the charts, the factor can be calculated. Refer to the topic entitled BP/BP1 Calculation Procedure in this instruction.BP/BP1 Calculation Procedure
For an example, we will use a 3508 Engine that is 1000 hp and 1800 rpm. The figure for 75% of rated speed of this engine is 1350 rpm (75% x 1800 rpm = 1350 rpm). Refer to the Marine Engine Performance graphs in the Technical Information File (TIF) for values needed.From the propeller demand curve