GLASS-WINDOW 5300330 - Caterpillar

Connect cable assemblies (28) to electric starting motor (26) .
Connect ground strap (27) to the engine.
Illustration 6 g01946021
Note: A typical example
Install bracket (25) and the bolts.
Connect harness assembly (24) .
Reposition harness assemblies (22) and install clamp (23) .
Connect harness assemblies (22) to the alternator.
Illustration 7 g01946019
Reposition refrigerant compressor (19) and install the bolts.
Connect harness assembly (20) and harness assembly (21) .
Illustration 8 g01946018
Install belt (18) on the engine.
Illustration 9 g01946017
Reposition hoses (1) and install clamp (17) .
Illustration 10 g01946016
Connect harness assembly (16) .
Illustration 11 g01946015
Connect harness assembly (15) .
Illustration 12 g01946014
Attach a suitable lifting device and Tooling (A) to support (13). Install support (13) and bolts (14). The weight of support (13) is approximately 61 kg (135 lb).
Illustration 13 g01946013
Connect harness assembly (11) .
Connect hose assemblies (10) to fuel filter assembly (9) .
Install clamps (12) .
Lower the cab. Refer to Disassembly and Assembly, "Cab - Tilt".
Illustration 14 g01946011
Reposition the hoses and install clamps (8) .
Illustration 15 g01946009
Connect hose assembly (7) to the fuel tank.
Illustration 16 g01946008
Note: A typical example
Install fuel filter assembly (5) and the bolts.
Connect hose assemblies (6) to fuel filter assembly (5) .
Illustration 17 g01946007
Connect hose (3) and hose assembly (4) .
Illustration 18 g01946005
Install clamp (2) .
Connect hoses (1) and tighten the clamps.End By:
Install the radiator, the hydraulic oil cooler, and the fuel cooler. Refer to Disassembly and Assembly, "Radiator, Hydraulic Oil Cooler, and Fuel Cooler - Remove and Install".
Install the muffler. Refer to Disassembly and Assembly, "Muffler - Remove and Install".
Install the air cleaner. Refer to Disassembly and Assembly, "Air Cleaner - Remove and Install".
Install the refrigerant condenser. Refer to Disassembly and Assembly, "Refridgerant Condensor- Remove and Install".