8D7297 GLASS (tinted) Caterpillar parts
120G
Rating:
Alternative (cross code) number:
CA8D7297
8D-7297
8D7297
CA8D7297
8D-7297
8D7297
Weight: 30 pounds 13 kg.
MOTOR GRADER,
This part in 2 request:
Show.
This information for suppliers only!
2019-09-25
2019-09-24
Compatible equipment models: 8D7297:
Number on catalog scheme:
10
For full view, you need register
Caterpillar parts catalog:
Information:
Rework Procedure
Table 1
Required Parts
Item Qty Part Number Description
1 20 125-7874 Heat Shrink Tube
2 2 2L-8076 Ring Terminal
3 1 322-5650 Electrical Wire
4 2 8S-4626 Wire Splice The following update to the electrical wiring in the cab addresses the issue by moving the park brake door alarm power source to an unswitched source.
Illustration 1 g06139545
Illustration 2 g06138658
View of area A
Illustration 3 g06138663
View of area B
Locate wires 41X1 on terminal strip TB15G and 80E1 on TB15D located under the panel on the passenger side dashboard.
Remove these two wires from the terminal strip and secure the other wires back in place.
Remove the ring terminals from the ends of the wires and extend the wires with splices, using 322-5650 Electrical Wire, to TB14B behind the operator gauge cluster.
Use 2L-8076 Ring Terminal with insulation 125-7874 Heat Shrink Tube to land both wires to TB14B.
Insulate the splices and terminals with 125-7874 Heat Shrink Tube.
Table 1
Required Parts
Item Qty Part Number Description
1 20 125-7874 Heat Shrink Tube
2 2 2L-8076 Ring Terminal
3 1 322-5650 Electrical Wire
4 2 8S-4626 Wire Splice The following update to the electrical wiring in the cab addresses the issue by moving the park brake door alarm power source to an unswitched source.
Illustration 1 g06139545
Illustration 2 g06138658
View of area A
Illustration 3 g06138663
View of area B
Locate wires 41X1 on terminal strip TB15G and 80E1 on TB15D located under the panel on the passenger side dashboard.
Remove these two wires from the terminal strip and secure the other wires back in place.
Remove the ring terminals from the ends of the wires and extend the wires with splices, using 322-5650 Electrical Wire, to TB14B behind the operator gauge cluster.
Use 2L-8076 Ring Terminal with insulation 125-7874 Heat Shrink Tube to land both wires to TB14B.
Insulate the splices and terminals with 125-7874 Heat Shrink Tube.
Parts glass Caterpillar catalog:
120G, 12G, 130G, 140G, 14G, 160G, 16G, 215, 215B, 225, 229, 235, 235B, 235D, 2384C, 245, 245B, 2484C, 24H, 559C, 579C, 611, 613C, 613C II, 615, 615C, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623...
120G, 12G, 130G, 140G, 14G, 16G
120G, 12G
120G, 12G
8D7674
GLASS (tinted)
120G, 12G
120G, 12G
9D5544
GLASS (tinted)
120G, 12G
120G, 12G
120G, 130G
9D1588
GLASS
120G, 130G
120G, 130G
120G
120G
120G
2C7902
GLASS
120G
120G
120G
9D1588
GLASS
120G, 130G
120G, 130G
120G, 130G
9D0937
GLASS (Untinted)
120, 140
120, 140
8D6443
GLASS (Untinted)
120, 140
120, 140
2C7902
GLASS
120G
120G
120G
120G