9U5255 GLOVES Caterpillar parts
Rating:
Alternative (cross code) number:
CA9U5255
9U-5255
9U5255
CA9U5255
9U-5255
9U5255
Weight: 1 pounds 0 kg.
Information:
ACTION REQUIRED
1. Raise the bulldozer blade and secure it in a safe position.
2. Check the tightening applied to each 5J-4473 Bolts installed on the cutting edges and end-bits.
3. Tighten the bolts to a specified torque of 475 +/- 60 N.m (350 +/- 45 lb ft).
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification:
US
Canada
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 1*******
100% 100% 0% 0% 0% 0%
This is a 1.0-hour job for Group 1
Loose bolts must be tightened to the specified torque and do not need to be replaced. In case of failure, bolts, nuts, and washers can be replaced, as required.
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
100% 100% 0% 0% 0% 0%
This is a 1.0-hour job for Group 2
Loose bolts must be tightened to the specified torque and do not need to be replaced. In case of failure, bolts, nuts, and washers can be replaced, as required.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
EXAMPLE COPY OF OWNER NOTIFICATION
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TIGHTENING THE CUTTING EDGES AND END-BIT BOLTS
MODELS INVOLVED - D6K, D6K2, D6N, AND D6T TRACK-TYPE TRACTORS
Dear Cat Product Owner:
The tightening specification on the bulldozer blade cutting edges and end-bits need to be checked and possibly corrected on the products listed below. Improperly tightened or loose bolts can lead to bolt breakage and/or premature cutting edges breakage. You will not be charged for the service performed.
Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.
If you are no longer the owner of this product(s), please contact your local Cat dealer so that our records can be updated.
Please refer the dealer to their Service Letter dated 05Feb2013 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 05Feb2013 Service Letter
Parts gloves Caterpillar catalog:
4C9870
GLOVES
Caterpillar
Caterpillar
4C9869
GLOVES
Caterpillar
Caterpillar
4C9868
GLOVES
Caterpillar
Caterpillar
4C9867
GLOVES
Caterpillar
Caterpillar
4C9866
GLOVES
Caterpillar
Caterpillar
4C9865
GLOVES
Caterpillar
Caterpillar