7W2217 GOV & FUEL INJ PUMP GP Caterpillar parts
D4H, D4HTSK II
Rating:
Alternative (cross code) number:
CA7W2217
7W-2217
7W2217
CA7W2217
7W-2217
7W2217
Weight: 869 pounds 394 kg.
TRACK SKIDDER, TRACK-TYPE TRACTOR,
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g00544018
Illustration 2 g00544019
Disconnect water inlet connection (1) from water pump (3).
Remove bolts (2).
Remove bolts (6).
Remove elbow (4), tube (7), and elbow (8) as a unit. Check the gaskets and the O-ring seal for wear or damage. If necessary, replace the gaskets.
Attach Tooling (A) and a suitable lifting device to water pump (3). The weight of water pump (3) is approximately 68 kg (150 lb). Remove bolts (5) that hold water pump (3) to the front housing. Remove water pump (3).
Remove the O-ring seal from water pump (3). Check the O-ring seal for wear or damage. If necessary, replace the O-ring seal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g00544018
Illustration 2 g00544019
Disconnect water inlet connection (1) from water pump (3).
Remove bolts (2).
Remove bolts (6).
Remove elbow (4), tube (7), and elbow (8) as a unit. Check the gaskets and the O-ring seal for wear or damage. If necessary, replace the gaskets.
Attach Tooling (A) and a suitable lifting device to water pump (3). The weight of water pump (3) is approximately 68 kg (150 lb). Remove bolts (5) that hold water pump (3) to the front housing. Remove water pump (3).
Remove the O-ring seal from water pump (3). Check the O-ring seal for wear or damage. If necessary, replace the O-ring seal.
Caterpillar SIS machinery equipment:
Caterpillar SIS
D4H & D4H LGP TRACTORS / DIRECT DRIVE / 2AC00001-03999 (MACHINE) POWERED BY 3204 ENGINE »
7W-2217
GOV & FUEL INJ PUMP GP
D4H Track-Type Skidder Series II 8ZF00001-UP (MACHINE) POWERED BY 3204 Engine »
7W-2217
PUMP GP-GOV & FUEL INJ
D4H & D4H LGP SERIES II TRACTORS / DIRECT DRIVE / 2AC04000-UP (MACHINE) POWERED BY 3204 ENGINE »
7W-2217
PUMP GP-GOV & FUEL INJ
D4H & D4H LGP SERIES II TRACTORS / POWER SHIFT / 8PB04000-UP (MACHINE) POWERED BY 3204 ENGINE »
7W-2217
PUMP GP-GOV & FUEL INJ
Caterpillar parts catalog:
Parts gov Caterpillar catalog:
7W0637
GOV & FUEL INJ PUMP GP
229, D5H, D5H XL, D5HTSK II
229, D5H, D5H XL, D5HTSK II
4W0470
GOV & FUEL INJ PUMP GP
3204, 943
3204, 943
4W7796
GOV & FUEL INJ PUMP GP
561D, D5B
561D, D5B