GOVERNOR GP 1284789 - Caterpillar

In the HOLD position (4), the spring (9) holds spool (8) in the centered position. No pilot oil enters the control valve through the port (10) and port (11). Any pilot oil in the pilot lines drains through the pilot valve to the tank. The spool (8) blocks the flow of pump supply oil in passage (7) .Passage (7) is common to all control valves in the bank valve. The passage has no outlet. The spool blocks the flow of pump supply oil until the operator moves the pilot valve.STABILIZER UP Position
Illustration 3 g01230278
Illustration 4 g01229073
When the stabilizer circuit is the only hydraulic circuit in operation, the stabilizer circuit will have the highest signal oil pressure in the hydraulic system. When the pilot valve (1) and the pilot valve (2) are moved to the STABILIZER UP position (5), pilot oil enter the control valve through port (25) and flows to chamber (26). When the pilot oil overcomes the force of spring (18), spool (17) moves to the right. Pin (16) moves upward on spool 17. The lower section (14) of the poppet in port (12) moves upward. Spring (13) and spring (15) are compressed.When the spool moves to the right, pump supply oil flows from passage (11) around the spool and into passage (22) .The hydraulic oil in passage (22) flows to pressure compensator valve (10). In the pressure compensator valve, the hydraulic oil flows into internal passages. The pressure compensator valve moves up. As the pressure compensator valve moves up, the cross-drilled passage is opened to an internal passage that is in the valve. Some of the hydraulic oil flows around the pressure compensator valve to chamber (8) and chamber (9). The hydraulic oil that flows to chamber (9) is signal oil. The signal oil balances the pressure compensator valve against the hydraulic oil pressure in passage (22). This controls the flow across spool (17) .The signal oil in the internal passage flows to the pressure compensator valve in each control valve. The signal oil also flows to the pressure and flow compensator valve on the hydraulic pump. The signal oil helps to control the output of the hydraulic pump. The hydraulic pump upstrokes and the hydraulic oil pressure in passage (11) and passage (22) increases. The hydraulic oil flows through chamber (8) to passage (21) and passage (23) .In passage (21), spool (17) blocks the flow of oil. In passage (23), the oil flows around the spool (17) to chamber (24).
Illustration 5 g01229075
When the oil pressure overcomes the force of spring (27) and spring (28), the lower section (29) of the poppet moves upward. Oil flows through the lower section (29) of the poppet into chamber (31). The oil flows through section (32) of the poppet. The oil then flows through the port (7). As the flow of oil increases, the ball (30) moves up. Spring (27) is compressed more. Oil flows around the ball (30) into chamber (31). This oil helps balance the pressure in chamber (31) and