GOVERNOR GP 1W0516 - Caterpillar

Illustration 1 g01237622
(1) Air compressor (2) NutPerform the following steps in order to properly tighten the nut:
Tighten the nut to a torque of 170 15 N m (125 11 lb ft).
Use a soft faced hammer and a 213-3530 Socket and tap the gear one time. Tighten the nut to a torque of 170 15 N m (125 11 lb ft).
Use a soft faced hammer and a 213-3530 Socket and tap the gear one time. Tighten the nut to a torque of 170 15 N m (125 11 lb ft). (3) Gear (4) BoltTighten the bolt that holds the air compressor line on engines that are equipped with this hose assembly. Tighten the bolt to the following torque. ... 28 7 N m (21 5 lb ft)Use the following procedure to mount the air compressor.
Install two bolts (A) and tighten the bolts to a torque of 100 20 N m (75 15 lb ft).
Install the following four bolts finger tight: (B), (C) and (D) .
Tighten one bolt (B) to a torque of 50 10 N m (37 7 lb ft).
Tighten two bolts (C) to a torque of 55 10 N m (40 7 lb ft).
Tighten one bolt (D) to a torque of 28 7 N m (21 5 lb ft).