GOVERNOR 3966864 - Caterpillar

Illustration 1 g00888137
Install swing bearing (2) that is stamped with a "S" on the inner race relative to the carbody and stopper (1) . (3) Apply 8C-8422 Sealant between the mating surfaces of the gear group and the upper frame assembly. Apply 8C-8422 Sealant between the mating surfaces of the gear group and the carbody. (4) Torque for 42 bolts ... 900 100 N m (660 75 lb ft) (5) Torque for 46 bolts ... 900 100 N m (660 75 lb ft) (6) Apply 9S-3263 Thread Lock on the threads of eight bolts. Torque for eight bolts ... 37 4 N m (27 3 lb ft) (7) Torque for clamp bolt ... 5.4 0.5 N m (3.98 .36 lb ft) (8) Apply 9S-3263 Thread Lock on the threads of 4 bolts. Torque for four bolts ... 37 4 N m (27 3 lb ft) (9) Insert corks into two holes which are marked "X". Corks must be recessed below the mounting surface. (10) Apply 5P-3931 Anti-Seize Compound to the dowel hole. (11) Apply 9S-3263 Thread Lock on the threads of two bolts. Torque for two bolts ... 37 4 N m (27 3 lb ft)