4P5738 GOVERNOR GP-UNIT INJECTOR Caterpillar parts
3116
Rating:
Alternative (cross code) number:
CA4P5738
4P-5738
4P5738
CA4P5738
4P-5738
4P5738
Weight: 14 pounds 6 kg.
TRUCK ENGINE,
Related part:
4P5738
GOVERNOR GP -L
10R0979
R
Compatible equipment models: 4P5738:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2321 Combination Puller 1
9S-9153 Puller Jaws 3 Start By:
Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00598317
Use tool (A) to remove camshaft gear (1) from camshaft (3) .
Remove thrust plate (2) from camshaft (3) .Note: It is not necessary to remove the camshaft gear unless the gear (1) or the thrust plate (2) is damaged.Note: Check the slot in the camshaft for the woodruff key for wear or damage.Note: Check the thrust plate (2) for wear or damage.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00598318
Note: During installation, ensure that camshaft (3) is clean and lubricate all of the components with clean engine oil.
Install the thrust plate (2) on the camshaft (3) .
Always wear protective gloves when handling parts that have been heated.
Heat camshaft gear (1) in an oven to a temperature of about 100 °C (212 °F) and install camshaft gear (1) onto camshaft (3) .Note: The camshaft gear is heated in order to ease the installation of the camshaft gear.Note: Ensure that the timing marks of the camshaft gear are on the front.End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2321 Combination Puller 1
9S-9153 Puller Jaws 3 Start By:
Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00598317
Use tool (A) to remove camshaft gear (1) from camshaft (3) .
Remove thrust plate (2) from camshaft (3) .Note: It is not necessary to remove the camshaft gear unless the gear (1) or the thrust plate (2) is damaged.Note: Check the slot in the camshaft for the woodruff key for wear or damage.Note: Check the thrust plate (2) for wear or damage.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00598318
Note: During installation, ensure that camshaft (3) is clean and lubricate all of the components with clean engine oil.
Install the thrust plate (2) on the camshaft (3) .
Always wear protective gloves when handling parts that have been heated.
Heat camshaft gear (1) in an oven to a temperature of about 100 °C (212 °F) and install camshaft gear (1) onto camshaft (3) .Note: The camshaft gear is heated in order to ease the installation of the camshaft gear.Note: Ensure that the timing marks of the camshaft gear are on the front.End By: Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts governor Caterpillar catalog:
1051819
GOVERNOR GP
3116
3116
1166840
GOVERNOR GP
3116
3116
3114, 3116, 950F, 950F II
