GOVERNOR AND FUEL INJECTION PUMP GROUP 6N1241 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     2    
B     185-3630     Filter Wrench Assembly     1    
Illustration 1 g01000492
Attach Tooling (A) and a suitable lifting device to base assembly (4) .
Position base assembly (4) . The weight of the base assembly is approximately 41 kg (90 lb).
Install bolts (11) .
Illustration 2 g01000491
Illustration 3 g01000490
Position base adapter (10) and the gasket in order to connect base assembly (4) .
Install bolts (9) .
Remove Tooling (A) .
Illustration 4 g01000489
Position bracket (6) .
Install bolts (8) and bolts (7) .
Illustration 5 g01000488
Use Tooling (B) to install engine oil filter assemblies (5) onto base assembly (4) .
Connect harness assemblies (3) onto base assembly (4) .
Install shield assemblies (2) and plates (1) .