GOVERNOR AND FUEL INJECTION PUMP GROUP 6N1463 - Caterpillar

6N1463 GOVERNOR AND FUEL INJECTION PUMP GROUP Caterpillar parts 215

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6N1463
6N-1463
6N1463

Caterpillar 6N1463 GOVERNOR AND FUEL INJECTION PUMP GROUP

Weight: 0.08 pounds 0 kg.

Buy GOVERNOR AND FUEL INJECTION PUMP GROUP 6N1463 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

This part in 1 request: Show. This information for suppliers only!

#356032 6N1463

2019-08-26

Compatible equipment models: 6N1463:

EXCAVATOR 215 Caterpillar

Number on catalog scheme:

Caterpillar 6N1463 Parts scheme GOVERNOR AND FUEL INJECTION PUMP GROUP

For full view, you need register

Information:

Illustration 15 g06276972
Remove screws (30) and harness assembly (29).
Illustration 16 g06276973
Remove bolts (32) and pilot valve control assembly (31).
Illustration 17 g06276974
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove screws (33) and bracket (34). Remove spring (35).
Illustration 18 g06276975
Remove screws (37) and guard (36).
Illustration 19 g06276976
Remove nut (38), lever (39), nut (40), bearing (41), and retaining rings (42).
Illustration 20 g06276977
Remove shaft assembly (45), bearing (44), and cam (43).
Illustration 21 g06276978
Remove bolts (50), bolt (47), nut (48), bracket (49), and bracket (46).
Illustration 22 g06276979
Remove bolts (52) and cover (51).
Illustration 23 g06276980
Remove bolts (53) and cover (54).
Illustration 24 g06276981
Remove bolts (56) and joystick assembly (55).
Illustration 25 g06276982
Remove nut (57), bolts (58), and bracket assembly (59).
Illustration 26 g06276984
Remove fittings (60) and (61).Installation Procedure
Install the STIC control and pilot valve (steering) in the reverse order of removal.
Tighten nut (57) to a torque of 25 5 N.m (221 44 lb in).
Tighten bolts (56) to a torque of 6 1 N.m (53 9 lb in).
Tighten screws (53) and (52) to a torque of 6 1 N.m (53 9 lb in).
Apply Tooling (A) to the threads of nuts (38) and (40). Tighten nuts (38) and (40) to a torque of 30 7 N.m (266 62 lb in).
Tighten screws (30) to a torque of .70 .15 N.m (6.2 1.33 lb in).
Tighten screws (25) to a torque of 6 1 N.m (53 9 lb in).
Apply Tooling (B) to the threads of bolt (23). Tighten bolt (23) to a torque of 10 2 N.m (89 18 lb in).
Tighten screw (20A) to a torque of 50 10 N.m (37 7 lb ft).
Tighten screws (19) to a torque of 6 1 N.m (53 9 lb in).
Tighten screws (17) to a torque of 2.50 .25 N.m (22.13 2.21 lb in).
Tighten nut (9) to a torque of 8.5 1.3 N.m (75.2 11.5 lb in).
Tighten screws (11) to a torque of 6 1 N.m (53 9 lb in).
Apply Tooling (B) to the threads of screw (10).
Tighten screws (4) to a torque of 6 1 N.m (53 9 lb in).