GOVERNOR A 8A1955 - Caterpillar

TARGET="_parent">Oil Cooler Core (Transmission) - Clean
Radiator Core - Clean
Seat Belt - Inspect
Travel Alarm - Test
Walk-Around Inspection
Every 10 Service Hours or Daily for Machines Used in Severe Applications
Boom and Stick Linkage - Lubricate
Every 50 Service Hours or Weekly
Boom and Stick Linkage - Lubricate
Drive Shaft - Lubricate
Tire Inflation - Check
Wheel Nut Torque - Check
Every 100 Service Hours or 2 Weeks
Axle Oscillation Bearings - Lubricate
Stabilizer Bearings - Lubricate
Initial 250 Service Hours
Final Drive Oil - Change
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Hydraulic System Oil Filter (Return) - Replace
Swing Drive Oil - Change
Every 250 Service Hours or Monthly
Axle Bearings (Front) - Lubricate
Axle Oil Level (Front) - Check
Axle Oil Level (Rear) - Check
Belts - Inspect/Adjust/Replace
Condenser (Refrigerant) - Clean
Cooling System Hoses - Inspect
Engine Oil and Filter - Change
Final Drive Oil Level - Check
Fuel System Priming Pump - Operate
Fuel System Secondary Filter Number One - Replace
Fuel System Water Separator Element - Replace
Swing Bearing - Lubricate
Swing Drive Oil Level - Check
Transmission Oil Level - Check
Every 500 Service Hours for Towing
Axle Oil (Front) - Change
Axle Oil (Rear) - Change
Transmission Oil and Filter - Change
Every 500 Service Hours or 3 Months
Engine Crankcase Breather - Clean/Replace
Fuel System Secondary Filter Number Two - Replace
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Every 1000 Service Hours or 6 Months
Battery - Clean
Battery Hold-Down - Tighten
Brake Discs - Check
Drum Brakes - Inspect
Hydraulic Generator Brushes and Commutator - Inspect
Hydraulic Generator Coupling - Inspect
Hydraulic System Oil Filter (Return) - Replace
Parking Brake Pads - Inspect/Replace
Swing Drive Oil - Change
Every 2000 Service Hours or 1 Year
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
Engine Valve Lash and Fuel Injector Timing - Check
Final Drive Oil - Change
Hydraulic System Oil - Change
In-Line Refrigerant Dryer - Replace
Steering Linkage - Lubricate
Swing Gear - Lubricate
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 3000 Service Hours or 3 Years
Cooling System Coolant Extender (ELC) - Add
Every 6000 Service Hours or 4 Years
Cooling System Coolant (ELC) - Change