GOVERNOR AND FUEL INJECTION PUMP GROUP 8N1037 - Caterpillar

Illustration 1 g02154157
Settings Screen
A settings screen will appear when the operator presses the "OK" button while highlighting settings on the main menu screen, or when "Back" is pressed from deeper within the menu structure. The purpose of this screen is to provide navigation of the various types of settings available. This screen displays a list populated the available types of settings. Pressing "OK" will navigate to the appropriate screens. Pressing the "Back" button shall navigate to the Main Menu screen.View/Edit Settings
Illustration 2 g02154170
View/Edit Settings Screen
A View/Edit Settings Screen can be seen in the display settings example. A "Display" screen will appear when the operator presses the "OK" button while highlighting "Display" on the Settings screen, or when "Back" is pressed from deeper within the menu structure. The purpose of this screen is to show all available settings, along with current values. The user may also select a setting to adjust. Pressing "OK" will navigate to the highlighted screens. Pressing "Back" will navigate to the Settings screen. Setting Selection Screen
Illustration 3 g02154171
Setting Selection Screen
The purpose of this screen type is to allow the user to change a machine or display setting. This screen will contain a list of, populated by the available settings. The active setting is shown with a checkmark next to it. If the user presses "OK", the check shall immediately move to the selection, and a confirmation message will be displayed, "Setting Applied". After the confirmation popup is displayed for 3 seconds, the display shall return to the previous screen. An exception to these rules is the Language selection screen. In this case, an "OK" press shall immediately translate the screen into the selected language, a feedback popup shall be shown in the selected language, and, after 3 seconds, the popup shall go away, without navigating to the previous screen. If "Back" is pressed, the display will return to the previous screen.Top Gear Select
Illustration 4 g02154172
Number Entry Screen
The "Top Gear Select Screen" will appear when "OK" is pressed while "Top Gear Select" is highlighted on the"machine settings" screen. The purpose of this screen is to provide the ability to change the Top Gear value. The initial value displayed will be current value. If the parameter does not have a valid current setting, the initial value will be zero. By pressing the"Up Button" the next higher value shall be selected. By pressing the "Down Button"the next lower value shall be selected. If the user presses "OK", the entered value will be applied. A confirmation message shall be displayed"Setting Applied." After the confirmation popup is displayed for 3 seconds, the display returns to the Setting screen. If "Back" is pressed, the previous settings are retained, and the display will return to the previous screen.Traction Control
Illustration 5 g02470337In the case of a traction control fault the following info po-up will be displayed. This pop-up will function as a Level 1 Event pop-up, whereby the operator can snooze the pop-up. Display Settings
The display allows the user to view and/or program its settings. These will