GOVERNOR AND FUEL INJECTION PUMP GROUP 8N3657 - Caterpillar

8N3657 GOVERNOR AND FUEL INJECTION PUMP GROUP Caterpillar parts 3208

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8N3657
8N-3657
8N3657

Caterpillar 8N3657 GOVERNOR AND FUEL INJECTION PUMP GROUP

Weight: 0.02 pounds 0 kg.

Buy GOVERNOR AND FUEL INJECTION PUMP GROUP 8N3657 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

Compatible equipment models: 8N3657:

INDUSTRIAL ENGINE 3208 Caterpillar

Number on catalog scheme: 1

Caterpillar 8N3657 Parts scheme GOVERNOR AND FUEL INJECTION PUMP GROUP

For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02315333
Slide locking tab (2) into the unlocked position. Disconnect harness assembly (1) from crankshaft position sensor (3).
Remove bolt (4) from the cylinder block.
Carefully remove crankshaft position sensor (3) from the cylinder block. Note: Do not use a lever to remove the crankshaft position sensor from the cylinder block.
Remove O-ring seal (5) from crankshaft position sensor (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02315333
Install a new O-ring seal (5) to crankshaft position sensor (3). Note: Do not lubricate the O-ring seal.
Install crankshaft position sensor (3) to the cylinder block. Install bolt (4) and tighten the bolt to a torque of 14 N m (124 lb in).
Connect harness assembly (1) to crankshaft position sensor (3). Slide locking tab (2) into the locked position.