GOVERNOR GP 8N6775 - Caterpillar

face="Courier New">Step 25B: Install the 8M-0505 Adapter with 238-5080 O-Ring (Item 6 in Detail J) to the manifold and tighten to a torque of 55 Nm (40.5 ft-lb).
Step 25C: Install two 9S-8005 Plugs with two 238-5080 O-Rings and tighten to a torque of 70 Nm (51.6 ft-lb) (see Item 5 Detail J).
Step 25D: Install the 364-4034 Manifold to the 367-8542 Bracket using two 7X-0288 Bolts and two 8T-4896 Washers (see Item 7 in Detail J).
Step 26: Install the 367-8637 Hose Assembly shown in Image 4.5.1.
Note: The fuel pressure regulating manifolds located on both sides of the front of the engine may need to be repositioned to allow the 367-8637 Hose Assembly to have adequate clearance to avoid interference.
Step 27: Step 25: To secure the 367-8637 Hose Assembly to the 367-8542 Bracket, install the 6V-8801 Nut, 4L-6459 Bolt, 7X-0732, two 8T-4896 Washers, 353-7957 Grommet, 8T-1887 Clip, and 8T-1888 Clip as (see Item 3 in Detail J in Image 4.5.4 and Image 4.5.5).
Step 28: Install the two 364-5899 Hose Assemblies that connect the front 1P-1376 Connectors to the 364-4034 Manifold and tighten to a torque of 27 Nm (19.9 ft-lb) as shown in Image 4.5.1.
Step 29: To secure the 364-5899 Hose Assemblies to the 364-5901 Bracket on the left hand side of the engine and the 364-5900 Bracket on the right hand side of the engine shown Images 4.5.1 and 4.5.4, install two 4L-6454 Bolts, two 7V-6571 Grommets, two 6V-8801 Nuts, four 8T-4896 Washers, two 8T-1889 Clips, and two 8T-1890 Clips (see Item 3 in Detail I and Item 2 in Detail L).
Step 30: Reinstall the 269-6440 Fuel Filter Mounting Bracket, the 308-3003 Fuel Filter Bracket, and the 237-9311 Fuel Filter Base Assembly.
Step 31: A new 6V-8722 Adapter with 228-7091 and 238-5080 O-Rings is required on the fuel filter base as shown as Item 1 in Detail H on Image 4.5.3.
Step 32: Install the 364-5892 Hose Assembly between the 364-4034 Manifold and the fuel filter base as shown in Images 4.5.1 and 4.5.2.
Step 33: Finish connecting the 364-3691 Hose Assembly to the fuel filter base as shown in Images 4.5.1 and 4.5.2.
Step 34: To secure the 364-5891 Hose Assembly to the 364-5900 Bracket as shown at Item 3 in Detail I on Image 4.5.4, install two 5P-1075 Washers, 6V-8801 Nut, 9B-7237 Bolt, 353-7957 Grommet, 8T-1887 Clip, and 8T-1888 Clip.
Step 35: To secure the 364-5892 Hose Assembly to the 364-5900 Bracket as shown in Item 4 in Detail I on Image 4.5.4, install 090-8635 Spacer, 4L-6454 Bolt, 5P-1075 Washer, 122-0450 Grommet, 8S-0023 Clip, and 8S-0024 Clip.
Step 36: The turbocharger cooling vent line will need to be re-routed and secured to the 364-5901 Bracket on the left hand side of the engine using the 129-3172 Stud Bolt, 6D-3479 Clip, two 6V-8801 Nuts and two 8T-4896 Washers as show as Item 5 on Detail I on Images 4.5.1 and 4.5.4.
Step 37: Install the 364-5895 Hose Assembly as shown in Images 4.5.1 and 4.5.2.
Step 38: To secure the 364-5895 Hose Assembly to the heat