GOVERNOR AND FUEL INJECTION PUMP GROUP 9N1292 - Caterpillar

Accumulated grease and oil on a machine is a fire hazard.Remove debris with steam cleaning or high pressure water, at the specified interval in the Maintenance Interval Schedule or each time any significant quantity of oil is spilled on the machine.
Note: Watch closely for leaks. If a leak is observed, find the source of the leak and correct the leak. If a leak is suspected or a leak is observed, check the fluid levels more frequently.
Illustration 1 g00428138
Inspect the counterweight and the drawworks for damage or for excessive wear. Repair the counterweight or the drawworks if there is any damage.
Inspect the counterweight cylinder for damage or for excessive wear. Repair any damage.
Inspect the engine precleaner screen for any dirt buildup and for debris buildup. Remove any dirt and debris.
Inspect the lights for broken bulbs and for broken lenses. Replace any broken bulbs and any broken lenses.
Illustration 2 g00428139
Remove any trash buildup around the engine. Remove any trash buildup that is under the floorplate. Also, remove any dirt buildup that is on the top of the crankcase guard.
Inspect the cooling system for leaks and repair any cooling system leaks. Check the hoses, the radiator fins, the radiator cap, and the drain area.
Inspect the engine compartment for leaks and repair any engine compartment leaks. Check around all seals and around all covers.
Illustration 3 g00428140
Inspect the condition of the steps and of the handholds. Inspect the steps and the handholds for cleanliness. If necessary, repair the steps or clean the steps.
Inspect the hydraulic system for leaks. Inspect the hoses, the seals, and the flanges. Repair any hydraulic system leaks.
Inspect the final drive for leaks. Repair any final drive leaks.
Illustration 4 g00428144
Make sure that the covers and the guards are secured. Inspect the covers and the guards for damage, for loose bolts, and for missing bolts.
Inspect the transmission for leaks. Check around the seals and around the covers. Also, check the hoses around the transmission. Repair any transmission leaks.
Illustration 5 g00428145
Inspect the tracks. Repair the tracks if the tracks are damaged or excessively worn. Tighten any loose bolts. Replace missing bolts. Check the tracks for excessive dirt buildup. Check the tightness of the track. Refer to Operation and Maintenance Manual, "Tracks" .
Inspect the guiding guards for the track. Check for loose bolts or for missing bolts. Check the track components for damage and for wear.
Illustration 6 g00428155
Inspect the operator compartment for cleanliness. Remove any trash buildup and any dirt buildup.
Inspect the instrument panel. Repair any broken gauges and any broken lights.
Make sure that the horn, the backup alarm, and the lights are working properly.Inspect the Hook and the Wire Rope Cable
Inspect the Hook
Inspect the hook frequently. The inspections should include observing the hook during operation of the hook. A designated person determines if the conditions that are found during the inspections constitute a hazard. The designated person will determine if a more detailed inspection is required.
Inspect the hook for any distortion such as bends in the hook or twists in the hook.
Inspect the hook for any wear.
Inspect the