0854703 GRAB BUCKET CYLINDER Caterpillar parts
E110B, E120B, E200B, EL240B
Rating:
Alternative (cross code) number:
CA0854703
085-4703
0854703
CA0854703
085-4703
0854703
Weight: 4 pounds 2 kg.
EXCAVATOR,
Number on catalog scheme:
8
For full view, you need register
Information:
Disassembly Procedure
Start By:
Remove the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank - Remove" for the machine that is being serviced. Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01130413
Remove four bolts (2) and bracket (1).
Remove two bolts (3) and fast fill assembly (4).
Illustration 2 g01130415
Remove two bolts (6) and bracket (5).
Illustration 3 g01130417
Remove tube assembly (7).
Illustration 4 g01130418
Remove four bolts (11) and filter assembly (12).
Remove bolt (9) and bracket (10).
Illustration 5 g01130419
Remove two bolts (13) and sight gauge (14) as an assembly.
Illustration 6 g01130420
Remove two bolts (13) and four O-ring seals (16) from sight gauge (14).
Repeat Step 7 and Step 8 for sight gauge (15).
Illustration 7 g01130509
Remove 47 bolts (17) and cover assembly (18).
Remove the sealant from the mating surfaces of cover (18) and the tank.
Illustration 8 g01130511
Remove tube assemblies (19), (20) and (21). Remove the O-ring seals from the tube assemblies.
Illustration 9 g01130512
Remove lock nut (24), plate (23) and screen assembly (22) from tube assembly (19).
Repeat Step 13 for tube assemblies (20) and (21).
Illustration 10 g01130514
Remove two lock nuts (26) and screen (25).
Illustration 11 g01130515
Remove tube assembly (27). Remove the O-ring seal from tube assembly (27).
Illustration 12 g01130798
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Depress and hold retainer (28) by hand whilst removing lock nut (31). Remove lock nut (31), retainer (28), spring (29), spring (32), valve (33), valve seat (30) and screen (34) from tube assembly (27).
Start By:
Remove the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank - Remove" for the machine that is being serviced. Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01130413
Remove four bolts (2) and bracket (1).
Remove two bolts (3) and fast fill assembly (4).
Illustration 2 g01130415
Remove two bolts (6) and bracket (5).
Illustration 3 g01130417
Remove tube assembly (7).
Illustration 4 g01130418
Remove four bolts (11) and filter assembly (12).
Remove bolt (9) and bracket (10).
Illustration 5 g01130419
Remove two bolts (13) and sight gauge (14) as an assembly.
Illustration 6 g01130420
Remove two bolts (13) and four O-ring seals (16) from sight gauge (14).
Repeat Step 7 and Step 8 for sight gauge (15).
Illustration 7 g01130509
Remove 47 bolts (17) and cover assembly (18).
Remove the sealant from the mating surfaces of cover (18) and the tank.
Illustration 8 g01130511
Remove tube assemblies (19), (20) and (21). Remove the O-ring seals from the tube assemblies.
Illustration 9 g01130512
Remove lock nut (24), plate (23) and screen assembly (22) from tube assembly (19).
Repeat Step 13 for tube assemblies (20) and (21).
Illustration 10 g01130514
Remove two lock nuts (26) and screen (25).
Illustration 11 g01130515
Remove tube assembly (27). Remove the O-ring seal from tube assembly (27).
Illustration 12 g01130798
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Depress and hold retainer (28) by hand whilst removing lock nut (31). Remove lock nut (31), retainer (28), spring (29), spring (32), valve (33), valve seat (30) and screen (34) from tube assembly (27).
Caterpillar parts catalog:
Parts grab Caterpillar catalog:
0854700
GRAB BUCKET ASSY.
E200B, E240C, EL240B
E200B, E240C, EL240B
0854699
GRAB BUCKET SET
E200B, E240C, EL240B
E200B, E240C, EL240B
0993780
GRAB BUCKET SET
E200B
E200B
1R9161
GRAB BUCKET CYLINDER
E110B, E120B, E200B, E240C, EL240B
E110B, E120B, E200B, E240C, EL240B
0858189
GRAB BUCKET ASSY.
E240C, EL240B
E240C, EL240B
0858191
GRAB BUCKET SET
E240C, EL240B
E240C, EL240B
0856705
GRAB BUCKET ASSY.
E110B, E120B
E110B, E120B
0856708
GRAB BUCKET SET
E110B, E120B
E110B, E120B