GRADE CONTROL AR 3392027 - Caterpillar

View From Under Machine
Illustration 22. Remove eight bolts (1), the washer and nuts that hold the rear drive shaft in position. Remove rear drive shaft (2). The following steps are for the installation of the rear drive shaft.3. Be sure the universal joints are in position on the same center line with the rear drive shaft.4. Put 5P3931 Anti-Seize Compound on the threads of bolts (1).5. Put rear drive shaft (2) in position, and install bolts (8), the washers and the nuts. Tighten the nuts to a torque of 160 15 N m (120 11 lb ft). Refer to Illustration 2 for the correct tightening sequence.6. Separate the steering frame lock link. See the topic "Separate & Connect Steering Frame Lock Link" in this module.