GREASE 4429084 - Caterpillar

to the Owner's Manual of the OEM for your type of control.
Do not push down or hold the throttle down while the engine is cranked. The system will automatically provide the correct amount of fuel that is needed to start the engine.
If the engine fails to start within 30 seconds, stop. Wait for two minutes in order to allow the starting motor to cool before attempting to start the engine again.Note: The "CHECK ENGINE/DIAGNOSTIC" lamp may come on after the engine is started. If this occurs, the ECM has detected a problem with the system. Refer to the Operation and Maintenance Manual, "Diagnostic Flash Code Retrival" (Operation Section) for more information.
Check all gauges during the warm-up period.
Oil pressures and fuel pressures should be in the normal range on the instrument panel. Inspect the engine for leaks and/or unusual noises.