GREASE TUBE AS 5E3383 - Caterpillar

High Pressure Cylinder (11)This safety message is located on the track adjusters.
g00100742
High Pressure Cylinder. Do not remove any parts from the cylinder until all of the pressure has been relieved. This will prevent possible personal injury or death.
Refer to Operation and Maintenance Manual, "Track Adjustment - Adjust" for the proper adjusting procedure.Hot Surface (12)This safety message is located on the engine hood.
g01067317
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Lift Eyes Can Fail (13)This safety message is positioned on the top of the hydraulic tank and the fuel tank.
g00100728
LIFT EYES OR TANK CAN FAIL WHEN LIFTING TANK CONTAINING FLUIDS RESULTING IN POSSIBLE PERSONAL INJURY. DRAIN TANK OF ALL FLUIDS BEFORE LIFTING.
Hydraulic Tank Pressure (14)This safety message is located on the top of the hydraulic tank.
g00100722
HYDRAULIC TANKRELIEVE TANK PRESSURE WITH ENGINE OFF BY REMOVING CAP SLOWLY TO PREVENT BURNS FROM HOT OIL.
High Pressure Gas (15)This safety message is positioned on the accumulator.
g00100733
This system contains high pressure gas. Failure to follow the instructions and warnings could cause an explosion, resulting in possible injury or death.Do not expose to fire. Do not weld. Do not drill. Relieve pressure before discharging.See Operation and Maintenance Manual for charging and discharging. See your Caterpillar Dealer for tools and detailed information.
Machine Swings (16)This safety message is located in two places on the rear of each side of the machine.
g00750340
Machine swings. Stay back. Crushing hazard could cause serious injury or death.
Pressurized System (17)This safety message is positioned on the radiator.
g00752966
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.