GRILL AS 3323816 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01322187
Install tube (13), O-ring seals (11), bolts (10), and valve assembly (12) .
Illustration 2 g01321995
Install pressure control valve (9). Install valve assembly (8) .
Illustration 3 g01321865
Illustration 4 g01321868
Install cover (7). Install bracket (5). Connect tube assembly (4). Connect harness assembly (6). Install U-bolt (2) to power train oil filler (3) .
Illustration 5 g01322924
Install floorplates (1) .End By: Install the transmission and transfer gears. Refer to Disassembly and Assembly, "Transmission and Transfer Gears - Install".