GRILL 3452656 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2 Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01111372
Use Tooling (A) and a suitable lifting device to install implement control valve (10) in the machine. The weight of implement control valve (10) is approximately 91 kg (200 lb).
Install bolts (9).
Illustration 2 g01111311
Connect hose assemblies (7), (6), and (5).
Connect all harness assemblies (2).
connect all hose assemblies (8).
Connect hose assembly (4).
Connect hose assembly (1).
Connect hose assembly (3).
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the hydraulic tank for the machine that is being serviced. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct filling procedure. End By:
Install the cab. Refer to Disassembly and Assembly, "Cab - Install".