GROMMET 1182950 - Caterpillar

Illustration 1 g01395850
(A) 19 1 mm (0.75 0.04 inch) (B) 17.5 1.0 mm (0.69 0.04 inch) (1) Pedal (2) Pedal stop (3) Travel stop
Set the pedal stop (2) to the dimension (B) .
Set the travel stop (3) to the dimension (A) .
Illustration 2 g01395852
(8) Throttle lever (9) Low idle screw (10) Nut (11) Cable (12) High idle stop
Fully depress the pedal (1). Adjust the cable (11) with nuts (10) until the throttle lever (8) touches the high idle stop (12) .
Activate the throttle lever (8) by depressing and releasing the pedal (1). Check that the throttle travels to the high idle stop (12) and the low idle screw (9) .
If the throttle lever (8) does not achieve full travel between the high idle stop (12) and the low idle screw (9), then check the travel stop (3) in order to make sure that the adjusting rod is set correctly. Also check the route of the cable in order to make sure that the cable (11) does not make sharp bends.