GROMMET 4584310 - Caterpillar

Illustration 9 g01384068
Remove bolts (10) from each side of the operator console. Pull the hose assemblies through the floor of the cab. Refer to Steps 4 and 5. Pull the harness assemblies through the floor of the cab. Refer to Steps 6 and 7. Note: If the machine is equipped with a radio, the antenna will need to be disconnected.
Illustration 10 g01384070
Disconnect harness assembly (11).
Illustration 11 g01384072
Remove bolts (12) and operator console (13). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Illustration 12 g01384072
Install operator console (13) and bolts (12).
Illustration 13 g01384070
Connect harness assembly (11).
Illustration 14 g01384068
Insert the hose assemblies and the harness assemblies through the hole in the cab floor. Insert harness assemblies through the holes in the cab floor. Install bolts (10) from each side of the operator console. Note: If the machine is equipped with a radio, the antenna will need to be connected.
Illustration 15 g01384067
Move floor mat (8) toward the rear of the cab. Install plate (9).
Illustration 16 g01384065
Connect harness assemblies (7).
Illustration 17 g01384064
Connect harness assemblies (6).
Illustration 18 g01384063
Connect hose assemblies (5).
Illustration 19 g01384062
Connect hose assemblies (4).
Illustration 20 g01377908
Remove Tooling (A). Install the cap onto the hydraulic tank.
Illustration 21 g01384061
Install cover (3).
Illustration 22 g01208165
Install plates (1) and (2). End By:
Install the seat. Refer to Disassembly and Assembly, "Seat - Install".