GROMMET 4705316 - Caterpillar

Table 1
Sales Model     Adaptable to Machines     Effective in production with Machines    
D6N     S/N:SC61-124     S/N:SC6125-UP    
S/N:PBA1-2042 S/N:PBA2043-UP    
S/N:PER1-741 S/N:PER742-UP    Use the following rework procedure in order to update the above listed adaptable machine with the new engine harness assembly routing:Rework Procedure
Table 2
Required Parts List    
Item     Qty     Part Number     Description    
1     1     4P-8134     Clip    
2     1     7K-1181     Cable Strap    
Illustration 1 g03737862
Open the left engine compartment door. Refer to Illustration 1.
Remove P-clip (A) from the engine harness assembly. Discard the parts.
Illustration 2 g03737879
Install ladder clip (1) in the same location of removed P-clip (A) and orient ladder clip (1) as shown in Illustration 2.
Illustration 3 g03737888
Install new cable strap (2) to ladder clip (1) at the green tape location as shown in Illustration 3.
Illustration 4 g03737907
Secure the engine harness assembly (B) inside ladder clip (1) and tie cable strap (2) to the end hole of ladder clip (1). Refer to Illustration 4.
Illustration 5 g03737916
Ensure engine harness assembly (B) does not interfere with the enclosure door and with the breather hose.