GROMMET AS-PAC 5003615 - Caterpillar

Illustration 5 g06060755
Close up of area A, left-hand side view.
(7) 297-0265 Solenoid and Relief Valve Gp
(9) 323-7942 Solenoid and Relief Valve Gp
(13) 355-7908 Block
(25) 453-6833 Plate
(28) 105-3483 Bolt
(33) 164-4180 Plug As
(37) 1P-3704 Rectangular Seal
(38) 1P-5767 Half Flange
(39) 4J-0522 O-Ring Seal
(41) 5P-0048 Cover
(42) 6V-0400 Half Flange
(47) 8T-4184 Bolt
(48) 8T-4192 Bolt
(49) 8T-4194 Bolt
(50) 8T-4223 Hard Washer
(52) 8T-4956 Bolt
(53) 8T-6466 Bolt
Assemble all parts in area (A) as shown.Note: When installing pressure sensor (10), apply a thin layer of hydraulic oil to the outer diameter of the male threads before assembly.
Illustration 6 g06061279
Area B
(1) 3V-9744 Spacer
(3) 121-1674 Plate
(6) 268-6835 Plate
(14) 363-2557 Support As
(18) 398-3994 Tube As
(20) 398-3998 Tube As
(21) 451-2175 Hard Washer
(22) 453-2838 Bolt
(23) 453-6830 Tube As
(24) 515-9719 Plate As
(26) 453-8654 Hose As
(27) 455-2838 Hose As
(29) 108-7550 Clip
(36) 1P-3703 Rectangular Seal, "TUBE SIDE"
(37) 1P-3704 Rectangular Seal, "VALVE SIDE"
(42) 6V-0400 Half Flange
(44) 7Y-4538 Half Clamp
(45) 8T-4139 Bolt
(46) 8T-4176 Bolt
(47) 8T-4184 Bolt
(50) 8T-4223 Hard Washer
(51) 8T-4244 Nut
(52) 8T-4956 Bolt
(54) 8T-7930 Bolt
Install components in area (B) as shown.
Illustration 7 g06061364
Area C
(4) 153-8798 Plate
(15) 372-9856 Plate
(17) 398-3993 Tube As
(18) 398-3994 Tube As
(19) 398-3997 Tube As
(20) 398-3998 Tube As
(36) 1P-3703 Rectangular Seal
(43) 7X-0584 Hard Washer
(44) 7Y-4538 Half Clamp
(45) 8T-4139 Bolt
(47) 8T-4184 Bolt
(50) 8T-4223 Hard Washer
(52) 8T-4956 Bolt
Install remaining components in area (C) as shown.
Unless specified, tighten all hardware and fittings to standard torque.
Illustration 8 g00687600
Check for leaks.