GROMMET AS 6V8744 - Caterpillar

Illustration 20 g02796437Use the System Setup menu to monitor and control applications systems. Use this menu to access the following setup menus:
Reset to Factory Screens
System InfoReset Defaults
Illustration 21 g02796454Use the Reset Defaults menu to reset all the monitoring system settings to the original factory default settings.System Info
Illustration 22 g02796494The System Info screen displays the part number, the revision number, and the serial number. Only information is displayed in the System Info screen. No changes can be made.Fault Pop-Up Alarms
Illustration 23 g02625876When a fault is detected on the network, a fault information pop-up window will be displayed listing the current fault information.Warning lights will flash when a popup alarm occurs and will stay flashing until acknowledged. Warning lights will remain lit until the fault is no longer on the network.Press the exit button in order to clear the pop-up alarm and return directly to the previous display information. Press the up key in order to go to the next fault. Press the down key in order to go to the previous fault. Press the select key in order to clear the pop-up and go directly to the current active fault information screen.Faults that have been acknowledged and are no longer active will be shown in the Active Faults log in italics. Logged faults will be displayed in the Previous Faults log.Signals
The following signals are available for monitoring:
Ambient Temp
Battery Voltage
CMV (If Equipped)
Coolant Temp
DPF 1 Soot Percent
Engine Load
Engine Oil Press
Engine Speed SW
Fuel Level
Fuel Rate
Hydraulic Temp
n/min
Vehicle Speed
Vibe Speed