GUARD AS-REAR-RH 1078323 - Caterpillar

Illustration 16 g00987572
Install the three valve bodies on plate (27) .
Install adapter (26) and plates (25) .
Illustration 17 g00987541
Install cartridge assemblies (24) .
Illustration 18 g00987534
Install adapters (23) .
Illustration 19 g00987532
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install the spring and screen assembly (22) . Install O-ring seal (21) .
Illustration 20 g00987531
Connect the valve assembly and install bolts (20) .
Illustration 21 g00987530
Install adapter (19) . Tighten adapters (19) to a torque of 45 4 N m (33 3 lb ft).
Illustration 22 g00987527
Install bracket (18) , bolts (16) , and bolts (17) . Tighten bolts (16) to a torque of 12 3 N m (105 27 lb in). Apply Tooling (A) to the threads of bolt (17) . Tighten bolt (17) to a torque of 28 4 N m (21 3 lb ft).
Illustration 23 g00987510
Illustration 24 g00686158
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install spacer (11) and swivel (15) . Install washer (15) , spring (14) , nut (13) , and pin (12) . Repeat for the opposite side of plate (9) .
Use Dimension (C) as a reference. Dimension (C) equal 12.15 0.06 mm (0.478 0.002 inch).
Apply Tooling (A) to all the threads.
Tighten nut (13) to a torque of 12 3 N m (105 27 lb in).
Tighten plate (9) to a torque of 90 10 N m (66 7 lb ft).
Illustration 25 g00987508
Install lever assemblies (8) . Install clips (6) and pins (7) .
Illustration 26 g00987505
Install boots (5) and rod (4) . Tighten nuts (3) .
Illustration 27 g00987504
Install knob assembly (2) and screw (1) on the rod.End By: Install the pilot operated hydraulic control. Refer to Disassembly and Assembly, "Pilot Operated Hydraulic Control - Install" for the machine that is being serviced.