GUARD AS 1434013 - Caterpillar

Illustration 1 g06336335
Table 1
Item Qty Part Specification Description
1 4 5P-5700 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
2 30 5P-5855 Bolt After assembly, as required apply green Loctite 290 to the open top end of the bolt holes of the oil pan.
3 2 6V-4315 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
4 10 1A-2029 Bolt Use the following procedure to tighten the bolts:
1. First tighten the bolts (5) to standard torque.
2. Tighten the bolts (4) in a numerical sequence 1 to 10 as shown in Illustration 1 to a standard torque.
5 5
6 2 3P-0654 O-Ring Seal Before assembly, lubricate the bore lightly with the lubricant that is being sealed.
7 - - Before assembly, apply red Loctite 596 to both sides of the gasket joints.