GUARD AS 1632172 - Caterpillar

A separator may also be known as a centrifuge.The separator separates water and contaminants from the fuel oil. The densities of heavy fuel and water are almost equal. Therefore, the difference in density that is needed for efficient separation is very small. For optimum efficiency, the separator must be operated and maintained according to the recommendations of the OEM of the separator.The correct supply of heat is critical to proper operation of the separator. Small variations in the temperature of the fuel oil to the separator may cause a large change in the density of the fuel oil. It is very important to keep the fuel temperature constant. Regulate the inlet temperature to the separator to a tolerance of 2 °C.The temperature of the fuel to the separator depends on the viscosity of the fuel. The heater before the separator must operate at the correct temperature for the viscosity of the fuel. However, the maximum temperature of the fuel from the heater to the separator is 98 °C.Operate the separator according to the instructions that are provided by the OEM of the separator.
Check the module according to the instructions that are provided by the OEM of the module. See the engine's Technical Manual.
Perform the maintenance and service activities that are described in the literature.
Respond to any alarm immediately. Determine the cause of the alarm and make corrections as soon as possible.