1669455 GUARD AS-TRACK GUIDE Caterpillar parts
320B
Rating:
Alternative (cross code) number:
CA1669455
166-9455
1669455
CA1669455
166-9455
1669455
EXCAVATOR,
Compatible equipment models: 1669455:
Number on catalog scheme:
8
For full view, you need register
Information:
Illustration 34 g00827547
Select the "Product ID" selection that is displayed on the "Configuration" screen.
Click on the "Change" button that is located on the "Configuration" screen. This will display a dialog box.
Illustration 35 g00827548
Enter the "Product ID" of the machine. Refer to Illustration 36 for the proper format of the Product Identification Number.Note: The First Quarter of 2001, the Caterpillar Product Identification Number (PIN) changed from 8 characters to 17 characters. The "Product ID" that is required by the Machine Security System is Item (4) in Illustration 36.
Illustration 36 g00860618
(1) Caterpillar's World Manufacturing Code (characters 1 - 3). (2) Machine descriptor (characters 4 - 8) (3) Check character (character 9) (4) Machine Indicator Section (MIS) or Product Sequence Number (characters 10 - 17). These characters were previously referred to as the Serial Number.
Click on the "OK" button. This will cause the ET to display the following message.
Illustration 37 g00827549
Click on the "Yes" button to change the Product ID or click on the "No" button to cancel the change.If you enter an invalid "Product ID", the ET will display the following message:
Illustration 38 g00827550
Set the Time and the Date
It is necessary to set the correct time and the date for the Machine Security System. Use the following procedure to set the time and the date.
Connect the ET to the service connector via the communication adapter.
Place the Master Access Level Key into the key start switch and turn the key to the ON position.
Start the ET.
Click on the "Connect" icon in the menu bar of the ET.
Once the ET has established communications with the MSS ECM, select the "ECM date/time" option from the "Service" menu. This will cause the ET to display the following screen.
Illustration 39 g00827585
Press the "Change" button.
Illustration 40 g00827586
Enter the correct time and the date and press the "OK" button. Then, the ET will display the following message.
Illustration 41 g00827587
Click on the "Yes" button in order to change the date/time clock or click on the "No" button in order to cancel the change.
Perform the ""Operational Check"".Operational Check
Place a valid electronic key in the key start switch.
Turn the electronic key to the ON position until the green LED indicator turns ON.
Turn the key to the START position. The machine should start.
Turn the key to the OFF position.
Disconnect the grounded battery cable from the battery.
Reassemble all of the remaining parts and covers.
Reconnect the grounded battery cable to the battery.
Attach Special Instruction, RMHS1002, "Operation of the Machine Security System (MSS)" to the machine's Operation and Maintenance Manual with the adhesive that is provided.
Attach the 225-5927 Film (Security Notice) on the door of the machine or on the ROPS near the mounting and dismounting location of the operator.Troubleshooting
The machine fails to start
Indicator light does not turn on
Verify that all connections are tight.Check the indicator light.Indicator light remains red
The indicator is red for five seconds after attempting to start the machine. This indicates one of the following problems:
The key in the key start switch is not authorized for that machine. Refer to Service Manual, RENR2462, "Machine Security System (MSS)", "Key
Caterpillar parts catalog:
Parts guard Caterpillar catalog:
1348850
GUARD GP-SWIVEL
320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 320E L, 321C, 321D LCR, 323D L
320B, 320B FM LL, 320B L, 320B U, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 320E L, 321C, 321D LCR, 323D L
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M 2, 160M 3, 160M 3 AWD, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 305.5E, 307B, ...
311, 311B, 312, 312B, 320 L, 320B, 320C, 320N, 322B, 322B L, OEMS
311C, 314E CR, 315, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318B, 318C, 318D L, 318D2 L, 318E L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR,...
315B L, 315D L, 317B LN, 318B, 318C, 318E L, 320B, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 323D LN
315C, 318B, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 323D L, ...
1158647
GUARD
312E, 313B, 314D CR, 314D LCR, 316E L, 318C, 318E L, 319C, 320B, 320B FM LL, 320C, 320E, 320E L, 320E LN, 322B, 322B L, 322B LN, 322C, 322C FM, 323E L, 325B, 325B L, 325C, 325C FM, 325C L, 330B, 330B ...
312E, 313B, 314D CR, 314D LCR, 316E L, 318C, 318E L, 319C, 320B, 320B FM LL, 320C, 320E, 320E L, 320E LN, 322B, 322B L, 322B LN, 322C, 322C FM, 323E L, 325B, 325B L, 325C, 325C FM, 325C L, 330B, 330B ...
1619384
GUARD AS-TRACK GUIDE
320B, 320B FM LL
320B, 320B FM LL
320B, 320C, 322B L, 322C, 323D LN, 323D SA, 323E L, 325, 325 LN, 325B, 325B L, 325C, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, 329E, 329E L, 329E LN, 330C, 330D L, 336D L, OEMS
1355800
GUARD AS
320B
320B
1610743
GUARD AS
320B
320B
320B, 320B FM LL, 320C, 320C FM, OEMS
1232158
GUARD
320C FM, 325B L, M325B
320C FM, 325B L, M325B
5Q3368
GUARD AS.
320 L
320 L
5Q3367
GUARD AS.
320 L
320 L
8592042
GUARD, HEADLIGHT
FB221
FB221
8516230
GUARD
FB221
FB221
2371251
GUARD
324D L, 325D MH, 330D, 330D L, 330D MH, 345C, 345C MH, 365C
324D L, 325D MH, 330D, 330D L, 330D MH, 345C, 345C MH, 365C
7Y7439
GUARD
320B, 320B FM LL
320B, 320B FM LL
1847803
GUARD AS
325B L, 330B L, 345B II, 345B L
325B L, 330B L, 345B II, 345B L
1619592
GUARD
322C FM
322C FM
1845856
GUARD AS
320B
320B
1845855
GUARD AS
320B
320B