GUARD (OUTER L.H.) 1M6290 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     9U-7546     Stand     1    
8S-7650 Cylinder As     1    
8S-7610 Base As     1    
4C-5809 Electric Hydraulic Pump Gp     1    Start By:
Separate the track. Refer to Disassembly and Assembly, "Track - Seperate".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00979459
Install Tooling (A) under the front frame of the machine.
Illustration 2 g00979462
Install Tooling (A) under the rear of the machine.
Use Tooling (A) in order to raise the machine.
Illustration 3 g00979463
Position wood blocks underneath the rear of the machine.
Illustration 4 g00979466
Remove cover (3) and the O-ring seal.
Illustration 5 g00979468
Remove the bolts and plate (4) .
Illustration 6 g00979469
Illustration 7 g00979471
Attach a suitable lifting device to track roller frame (5) .
Remove pin (7) .
Remove track roller frame (5) from pin (6). The weight of track roller frame (5) is approximately 1043 kg (2300 lb).
Illustration 8 g00979537
Remove bearing (8) .Note: For further information concerning the disassembly and assembly of this item, refer to the Undercarriage Reconditioning Guide, SEBF8599, "Undercarriage Reconditioning Guide".