parts catalog

GUARD GP- 2559804 - Caterpillar

2559804 GUARD GP- Caterpillar parts GUARD
Alternative (cross code) number:
Caterpillar 2559804 GUARD GP-

Buy GUARD GP- 2559804 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Investigate the travel route for overpass clearances. Make sure there will be adequate clearance if the machine being transported is equipped with a ROPS, cab or canopy.To prevent the machine from slipping while loading or shifting in transit, remove ice, snow or other slippery material from the loading dock and the truck bed before loading.
Obey all state and local laws governing the weight, width and length of a load.Observe all regulations governing wide loads.
1. Block the trailer or rail car wheels before loading. 2. After the machine is in position on the transport vehicle, connect the steering frame lock link to hold the articulated frame rigid. 3. Lower the implements onto the floor of the transport vehicle and shift the transmission to NEUTRAL. 4. Engage the transmission control lock. 5. Engage the parking brake. 6. Turn off the engine. Remove the starter key. 7. Turn the disconnect switch off and remove the key. 8. Block the tires and secure the machine with tie-downs when transporting on a rail car or ... ... on a tractor-trailer. 9. Cover the exhaust opening or secure the rain cap to prevent the turbocharger from "windmilling" in transit.Roading
Before roading a machine, consult your tire dealer for recommended tire pressures and speed limitations."TON km/h" (TON MPH) limitations must be observed. Consult your tire dealer for the speed limit of the tires involved.When traveling long distances, stop every 40 km (25 miles) or 1 hour for 30 minutes to allow the tires and components to cool. Inflate the tires to the correct pressure.Use a self-attaching inflation chuck and stand behind the tire tread while inflating the tire. See "Tire Inflation Information." Bring the engine coolant, the crankcase oil and the transmission oil up to the correct levels.Check with the proper officials to obtain the required permits, etc. Travel at a moderate speed. Observe all speed limitations when roading the machine. Perform a "Walk-Around Inspection" and measure the fluid levels in the various compartments.

Parts guard Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.