2615505 GUARD AR-FINAL DRIVE Caterpillar parts
D6N
Rating:
Alternative (cross code) number:
CA2615505
261-5505
2615505
CA2615505
261-5505
2615505
TRACK-TYPE TRACTOR,
Compatible equipment models: 2615505:
Information:
Removal Procedure
Personal injury may occur from failure to properly service the batteries.Batteries give off flammable fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts the skin or eyes.Prevent sparks near the batteries. Sparks could cause vapors to explode. Do not allow jumper cable ends to contact each other or the engine. Improper jumper cable connections can cause an explosion.Always wear protective glasses when working with batteries.
Illustration 1 g03704977
Open the left side access door (1).
Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
Illustration 2 g03704985
Remove nut (2). Remove cover (3) and cover (4).
Illustration 3 g01314741
Typical example.
Disconnect cable assembly (7) and (8). Remove cable assembly (5). Remove batteries (6). Repeat for the other batteries. Installation Procedure
Install batteries (6) In the reverse order of removal.
Tighten the nuts to cover (4) to a torque of 20 5 N m (177 44 lb in).
Tighten nut (2) hand tight.
Personal injury may occur from failure to properly service the batteries.Batteries give off flammable fumes that can explode. Electrolyte is an acid and can cause personal injury if it contacts the skin or eyes.Prevent sparks near the batteries. Sparks could cause vapors to explode. Do not allow jumper cable ends to contact each other or the engine. Improper jumper cable connections can cause an explosion.Always wear protective glasses when working with batteries.
Illustration 1 g03704977
Open the left side access door (1).
Turn the battery disconnect switch to the OFF position. Refer to Operation and Maintenance Manual, "Battery Disconnect Switch".
Illustration 2 g03704985
Remove nut (2). Remove cover (3) and cover (4).
Illustration 3 g01314741
Typical example.
Disconnect cable assembly (7) and (8). Remove cable assembly (5). Remove batteries (6). Repeat for the other batteries. Installation Procedure
Install batteries (6) In the reverse order of removal.
Tighten the nuts to cover (4) to a torque of 20 5 N m (177 44 lb in).
Tighten nut (2) hand tight.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts guard Caterpillar catalog:
2855019
GUARD GP-BOTTOM
D5R LGP, D6N, D6N LGP, D6N OEM
D5R LGP, D6N, D6N LGP, D6N OEM
2733726
GUARD GP-BOTTOM
D6N, D6N LGP
D6N, D6N LGP
3005331
GUARD GP-REAR
D5R LGP, D6N, D6N LGP
D5R LGP, D6N, D6N LGP
2056163
GUARD AS
D5R LGP, D6M, D6N, D6N LGP
D5R LGP, D6M, D6N, D6N LGP
2056167
GUARD AS
D5R LGP, D6M, D6N, D6N LGP
D5R LGP, D6M, D6N, D6N LGP
2612047
GUARD AS
D6N, D6N LGP
D6N, D6N LGP
2929380
GUARD AS
D6N
D6N
2733728
GUARD AS
D6N, D6N LGP
D6N, D6N LGP
3374099
GUARD GP-TRACK GUIDE
324D L
324D L
2691167
GUARD AR-BOTTOM
330D L, 336D L, 336D2 L
330D L, 336D L, 336D2 L
3364568
GUARD GP-BOTTOM
325D L, 329D L
325D L, 329D L
2691166
GUARD AR-BOTTOM
325D L, 329D L
325D L, 329D L
2855017
GUARD GP-BOTTOM
D6N, D6N LGP
D6N, D6N LGP