2977517 GUARD AS-TRACK GUIDE Caterpillar parts
385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L
Rating:
Alternative (cross code) number:
CA2977517
297-7517
2977517
CA2977517
297-7517
2977517
Weight: 203 pounds 92 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2977517:
Number on catalog scheme:
2
For full view, you need register
Information:
Illustration 1 g06227941
Table 1
Item Qty Part Specification Description
1 4 281-2711 Washer Before assembly, lubricate both sides of the washers with clean engine oil.
2 1 332-3998 Cage As After installation, bore of 146-7411 Bushing in the cage assembly is 63.5 mm (2.50 inch).
Installation depth of bushing is 1.0 0.5 mm (0.04 0.02 inch).
3 2 331-4485 Thrust Washer Thickness of new thrust washer is 4.695 0.025 mm (0.1848 0.0010 inch).
Head of the 2A-3435 Bearing Dowel must be always below the surface of the thrust washer.
4 1 478-5468 Cluster Gear Assembly Diameter of new cluster gear assembly is 119.930 0.010 mm (4.7216 0.0004 inch).
Installation depth is 1.0 0.5 mm (0.04 0.02 inch).
5 1 430-8141 Idler Shaft Diameter of new idler shaft for the cluster gear assembly is 119.814 0.012 mm (4.7171 0.0005 inch).
6 1 290-1630 Shaft As Diameter of new shaft for the auxiliary drive gear is 63.430 0.010 mm (2.4972 0.0004 inch).
Install 8T-2153 Socket Setscrew until the socket setscrew bottoms out in the threaded portion of the hole.
Tighten the 8T-2153 Socket Setscrew to 6 1 N m (53 9 lb in).
End play of the PTO after assembly is 0.15 to 0.77 mm (0.006 to 0.030 inch).
7 1 5D-4311 O-Ring Seal Before assembly, lightly lubricate the bore with the lubricant that is being sealed.
8 2 255-5469 Bolt Torque to 570 80 N m (420 59 lb ft).
9 12 220-0771 Bolt Torque to 300 40 N m (221 30 lb ft).
10 1 8M-4704 O-Ring Seal Before assembly, lightly lubricate the bore with the lubricant that is being sealed.
11 1 479-0861 Adapter As After installation, bore of 332-0196 Bushing in the adapter assembly is 63.5 mm (2.50 inch).
Installation depth of bushing is 1.0 0.5 mm (0.04 0.02 inch).
Before assembly, apply thread sealant to the threads of the 8T-6759 Pipe Plug of the adapter assembly.
12 4 246-5451 Taperlock Stud Torque to 65 10 N m (48 7 lb ft).
13 1 173-9779 Bolt Before assembly, ensure that the mating surfaces of the bolt and the plate are free from the grease.
Torque to 900 100 N m (664 74 lb ft).
Caterpillar parts catalog:
Parts guard Caterpillar catalog:
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M 2, 160M 3, 160M 3 AWD, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 305.5E, 307B, ...
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C
2541946
GUARD AS
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
2666474
GUARD AS
365C, 385C, 385C L, 390D, 390D L
365C, 385C, 385C L, 390D, 390D L
2591857
GUARD AS
345C, 345C L, 365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
345C, 345C L, 365C, 365C L, 365C L MH, 385C, 385C FS, 385C L, 385C L MH
2521235
GUARD AS
325D L, 365C, 374D L, 385C, 385C L, 390D, 390D L
325D L, 365C, 374D L, 385C, 385C L, 390D, 390D L
3421911
GUARD AS-CYLINDER
390D, 390D L, 390F L
390D, 390D L, 390F L
3277547
GUARD AS
390D, 390D L
390D, 390D L
3607709
GUARD AS-FAN
374F L, 390F L
374F L, 390F L
4511819
GUARD AS
390F L
390F L
4157077
GUARD AS
390F L
390F L
3595719
GUARD AS-TRACK GUIDE
390F L
390F L
1634941
GUARD AS
323D LN
323D LN
365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 374F L, 385C
2000397
GUARD AS-TRACK GUIDE
365C L
365C L
2459342
GUARD AS
365C, 365C L, 365C L MH, 374D L
365C, 365C L, 365C L MH, 374D L
3599394
GUARD AS
330D, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
330D, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L
3049884
GUARD AS
SR118
SR118
2977524
GUARD AS-TRACK GUIDE
385C, 385C L, 390D L
385C, 385C L, 390D L
330C, 330D L, 330D MH, 345B II, 345C, 345C L, 345C MH, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L
330C, 330D L, 330D MH, 345B II, 345C, 345C L, 345C MH, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L
325C, 328D LCR, 330C, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
325C, 328D LCR, 330C, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L
2977519
GUARD AS-TRACK GUIDE
385C, 385C FS, 385C L, 390D L, 390F L
385C, 385C FS, 385C L, 390D L, 390F L