GUARD GROUP 2S6264 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Actuator Control Linkage - Replace
Barring Device - Lubricate
Engine Air Cleaner Element (Single Element) - Inspect/Clean/Replace
Engine Air Precleaner - Check/Clean
Fuel Control Valve - Replace
Overhaul Considerations
Valve Stem Projection - Measure/Record
Daily
Air Starting Motor Lubricator Oil Level - Check
Air Tank Moisture and Sediment - Drain
Coolant Level - Check
Electrohydraulic System - Inspect
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel Filter Differential Pressure - Check
Walk-Around Inspection
Every 250 Service Hours
Battery Electrolyte Level - Check
Engine Oil Sample - Obtain
Initial 1000 Service Hours
Cylinder Pressure - Test/Record
Electrohydraulic System Oil Filter - Change
Engine Valve Lash - Check
Valve Stem Projection - Measure/Record
Every 1000 Service Hours
Coolant Sample (Level 1) - Obtain
Every 2000 Service Hours
Aftercooler Condensation - Drain
Coolant Sample (Level 2) - Obtain
Engine Valve Lash - Check
Valve Stem Projection - Measure/Record
Every 4000 Service Hours
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Every 5000 Service Hours
Combustion Sensor - Clean/Inspect/Replace
Electrohydraulic System - Check/Adjust
Electrohydraulic System Oil - Change
Electrohydraulic System Oil Filter - Change
Engine Oil - Change
Engine Oil Filter - Change
Exhaust Bypass - Recondition
Inlet Air System - Check
Spark Plugs - Inspect/Adjust/Replace
Every 6000 Service Hours
Prechamber Check Valves - Clean
Every 8000 Service Hours
Air Starting Motor Lines Screen - Clean
Air Starting Motor Lubricator Bowl - Clean
Belts - Inspect/Adjust/Replace
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Crankcase Breather - Clean
Engine Mounts - Inspect
Engine Protective Devices - Check
Hoses and Clamps - Inspect/Replace
Inlet Gas Manifold and Piping - Check
Starting Motor - Inspect
Turbocharger - Inspect
Every 10 000 Service Hours