GUARD GP-COUPLING 2W2741 - Caterpillar

Illustration 1 g06012899
Area Isolation System Barrier Control Panel
Electrical Panel (1)
This safety message is on the Barrier Control Panel.
Illustration 2 g02716897
Shock/Electrocution Hazard – Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Service Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Operations Area Entry
Illustration 3 g06052717
Plan view
(2) Message
(3) Gate and proximity switch (if equipped)
(4) Light Curtain (if equipped)
(5) Lanyard
(6) AIS Strobe Light
(7) Laser Detection and Ranging sensor (LADAR) (if equipped)Message (2) is placed at a location that is visible to personnel at the entrance to the operations area. Message (2) may be on:
A physical barrier
Gate and proximity switch (if equipped) (3) and, or
Lanyard (5)Light Curtain (Laser) (4) (If Equipped)
The IEC and the United States Government Center of Devices for Radiology Health (CDRH) has classified this laser as a Class II laser product according to IEC 60825–1:2014.The maximum radiant power output of this laser is equal to or less than 1(one) milliwatts. Refer to the operator manual of the laser transmitter for installation and operating instructions. The laser supplied with your Laser System complies with all applicable portions of ""Title 21"" of the "Code of Federal Regulations, Department of Health and Human Services, Food and Drug Administration, Federal Register, 24 February 2016"This laser complies with "OSHA Standards Act,