AVSPARE.COM
parts catalog

GUARD AS 3236477 - Caterpillar



3236477 GUARD AS Caterpillar parts GUARD
Rating:
21
Alternative (cross code) number:
CA3236477
323-6477
3236477
Caterpillar 3236477 GUARD AS

Buy GUARD AS 3236477 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Personal injury or death can result from lifting a heavy component.The heavy component can fall if using an incorrect hoist and/or sling or fastener to lift the load.Be sure the hoist and other devices have the correct lifting capacity to lift a heavy component. The approximate weight of the heavy component is given below.
Note: Check the O-ring seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g06083927
Attach Tooling (A), Tooling (B), and a suitable lifting device to torque converter, transmission, and output transfer gears (9). The weight of torque converter, transmission, and output transfer gears (9) is approximately 1135 kg (2500 lb). Use Tooling (A), Tooling (B), and the suitable lifting device to position torque converter, transmission, and output transfer gears (9) above the machine.
Lower torque converter, transmission, and output transfer gears (9) into position on the machine.
Illustration 2 g06083941
Position bracket (14) and install bolts (13). Tighten bolts (13) to a torque of 520 70 N m (384 52 lb ft). Repeat for the opposite side of the machine.
Illustration 3 g06083938
Install mount (12). Lower torque converter, transmission, and output transfer gears (9).
Illustration 4 g06083932
Install bolts (11) and the washers.
Illustration 5 g06083928
Install mount bolt (10). Repeat for the opposite side of the machine.
Illustration 6 g06083915
Install valve (7). Install hose assemblies (8) and (6).
Illustration 7 g06083911
Install hose assembly (5).
Illustration 8 g06083906
Install hose (4). Install hose assembly (3).
Illustration 9 g06083903
Install hose assembly (2).
Illustration 10 g06083898
Install hose assembly (1).
Fill the hydraulic tank. Refer to Operation and Maintenance Manual, "Capacities - Refill" for the capacity of the hydraulic tank. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change".
Fill the transmission with oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".End By:
Install the piston pump (steering).
Install the drive shaft (rear).
Install the drive shaft (center).
Install the transmission oil filter base.
Install the hydraulic oil filter.
Install the brake accumulator.
Install the air cleaner.


Parts guard Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.