GUARD AS 3722570 - Caterpillar

Illustration 1 g00450607
(1) Torque for final installation of the nut ... 14 1.5 N m (10 1 lb ft) (2) Torque for installing the nipple assembly ... 14 4 N m (10 3 lb ft)
Illustration 2 g00102561
(3) Torque for installing the cartridge assembly ... 50 5 N m (37 4 lb ft) (4) Lubricate the O-ring with a minimal amount of the lubricant that is being sealed. (5) Torque for installing the seat ... 19 4 N m (14 3 lb ft) (6) Lubricate the O-ring with a minimal amount of the lubricant that is being sealed. (7) Torque for installing the orifice ... 2 1 N m (18 9 lb in) (8) 118-3731 Spring Length under test force ... 14.00 mm (.551 inch) Test force ... 36.0 1.8 N (8.10 .40 lb) Free length after test ... 15.99 mm (.630 inch) Outside diameter ... 12.1 mm (.48 inch)Flow of SAE 30W oil at 1000 kPa (145 psi) pressure drop ... 65 L/min (17 US gpm)Nominal coil voltage ... 12 VDCMaximum coil voltage ... 14.5 VDCMinimum coil voltage ... 10.7 VDCNominal coil resistance at 25°C (77°F) ... 7.75 1.00 OhmsMaximum coil resistance at 121°C (220°F) ... 12.68 OhmsMinimum coil resistance at -40°C (-40°F) ... 5.81 OhmsNominal current draw at 25°C (77°F) ... 1.55 AmperesMaximum current draw at -40°C (-40°F) ... 2.1 Amperes