GUARD GP-CONVEYOR 3972328 - Caterpillar

Illustration 1 g03826471The fuses are located on the rear left side of the machine.
Fuse - The fuses protect the electrical system from damage that is caused by overloaded circuits. Change the fuse if the element separates. If the element of the new fuse separates, check the circuit. Repair the problem before you operate the machine.
Replace fuses with the same type and size only. Otherwise, electrical damage can result.If it is necessary to replace fuses frequently, an electrical problem may exist. Contact your Caterpillar dealer.
Illustration 2 g03826488 (F1) Electric Pump - 125 amp (F2) Electrical System - 80 amp (F3) Engine ECM - 20 amp (F4) Spare - 10 amp (F5) Grade and Slope ECM - 15 amp (F6) Transmission ECM - 20 amp (F7) Steering ECM - 20 amp (F8) Machine ECM - 20 amp (F9) Right Turn Signal - 5 amp (F10) Left Turn Signal - 5 amp (F11) Horn - 10 amp (F12) Lights - 10 amp (F13) Monitoring System - 10 amp (F14) Brake Lights - 10 amp (F15) Fuel and DEF Pumps - 30 amp (F16) Start Switch and Steering ECM - 15 amp (F17) Start Switch and Machine ECM - 10 amp (F18) Spare - 10 amp (F19) Alarm - 10 amp (F20) Key Power to Grade and Slope ECM - 15 amp (F21) DEF ECM - 30 amp (F22) Diagnostic ECM - 10 amp (F23) Product Link ECM - 10 amp (F24) 12 V Power Receptacle - 10 amp (F25) Electrical System - 10 amp (F26) Beacon - 20 amp (F27) Display - 15 amp (F28) Hood Raise and Lower - 15 amp (F29) Aftertreatment ECM - 15 amp (F30) Start Switch - 7.5 amp (F31) Start Switch and Rotor ECM - 15 amp (F32) Side Plate Warning Lights - 10 amp (F33) Truck Lights - 10 amp (F34) Spare - 10 amp (F35) Conveyor Raise/Lower - 10 amp (F36) Spare - 10 amp (F37) Spare - 10 amp (F38) Work Lights 1 - 30 amp (F39) Travel Lights - 15 amp (F40) Work Lights 2 - 30 amp (F41) Work Lights 3 - 30 amp (F42) Start Switch and Electrical System - 10 amp (F43) Lights - 10 amp (F44) Spare - 15 amp (F45) Work Lights 4 - 30 amp (F46) Spare - 15 amp (F47) Conveyor Pump Interlock Solenoid - 10 amp (F48) Start Switch - 10 amp (F49) Spare - 10 amp (F50) Sensor Electrical System - 10 amp (FS1) Spare - 10 amp (FS2) Spare - 15 amp (FS3) Spare - 15 amp (FS4) Spare - 15 amp (FS5) Spare - 10 amp (FS6) Spare - 10 amp (K1) Spare - Relay (K2) Spare - Relay (K3) Spare - Relay (K4) Blower - Relay (K5) Water Fill Pump - Relay (K6) High Pressure Wash - Relay (K7) Conveyor Swing Left - Relay (K8) Conveyor Swing Right - Relay (K9) Right Grade Control Ski - Relay (K10) Left Grade Control Ski - Relay (K11) Spare - Relay (K12) Conveyor Lower