GUARD AS-SENSOR 4433869 - Caterpillar

Keep the machine under control at all times.Do not move the transmission or directional levers to NEUTRAL to allow the machine to coast.Select the gear range necessary before starting downgrade. Do not change gears while going downhill.A good practice is to use the same gear range going downgrade that would be used to go up the grade.Do not allow the engine to overspeed downhill. Use the brake pedal to reduce engine overspeed going downhill.When the load will be pushing the machine, put the transmission speed selector lever in FIRST speed before starting downhill.1. Raise all lowered implements enough to clear any obstructions. 2. Push down on the brake pedal to keep the machine from moving. 3. Pull the lock lever up to disengage the parking brake and to unlock the transmission and steering levers. 4. Move the transmission control lever to the desired speed. Move the directional control to the desired direction.5. Release the brake pedal.6. Move the governor control lever to the desired engine speed.Changing Speed And Direction
Speed and directional changes at full engine speed are possible. However, for operator comfort and maximum service life of power train components, decelerating and or braking, when changing directions is recommended.1. Decrease the engine speed by pushing the governor control in, or by pushing the decelerator pedal down. 2. Push the brake pedal down to stop the machine for a directional change. 3. Move the transmission control lever to the desired speed. 4. Move the directional control to the desired direction.5. Release the brake pedal.6. Increase the engine speed by releasing the decelerator pedal, or pulling back on the governor control lever.