GUARD GP-BOTTOM 4442816 - Caterpillar

Install O-ring seal (20) onto plug (19) .
Illustration 7 g00703722
Install plug (19) and the O-ring seal into the valve body. Tighten plug (19) to a torque of 25 5 N m (18 4 lb ft).
Illustration 8 g00703721
Install spool (16), guide (17), and spring (18) into the valve body.
Illustration 9 g01025453
Install O-ring seal (15) onto plug (14) .
Illustration 10 g00703719
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plug (14) and the O-ring seal into the valve body. Tighten plug (14) to a torque of 50 7 N m (37 5 lb ft).
Illustration 11 g01025408
Install O-ring seal (13) onto plug (12) .
Illustration 12 g00703716
Install plug (12) and the O-ring seal into the valve body. Tighten plug (12) to a torque of 5.0 1.5 N m (44 13 lb in).
Illustration 13 g00703715
Install spool valve (10) and spring (11) into the valve body.
Illustration 14 g01025540
Install backup ring (9) and O-ring seal (8) onto cover (7) .
Illustration 15 g00703713
Illustration 16 g00703712
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Use Tooling (A) to install cover (7) into the valve body. Install four bolts (6) .
Illustration 17 g01025377
Install O-ring seal (5) onto fittings (3) .
Illustration 18 g00703710
Install half flanges (2) and the cover. Install bolts (1) and the washers. Install two fittings (3) into valve body (4) .End By: Install the drift reduction valve (stick). Refer to Disassembly and Assembly, "Drift Reduction Valve (Stick) - Install" for the machine that is being serviced.