GUARD-FAN 4945722 - Caterpillar

Table 1
Required Parts    
Item     Part Number     Description     Quantity    
3     3S-8665     Clip     1    
4     9M-0164     Hose Clamp     1    
5     5P-0763     Hose    
77 cm (30 inch)    
6     038-3967     Bracket     1    
7     7D-1553     Clip     1    
8     124-1718     Spacer     1    
9     8T-4172     Bolt     1    
10     8T-4133     Nut     1    
11     8T-4121     Washer     1    Rework Procedure
Illustration 1 g01000988
Remove the side panel.
Illustration 2 g01000915
Disconnect hose clip (3) from fuel line (2) .
Illustration 3 g01000939
Illustration 4 g01001163
Remove one bolt from the oil pan of the engine near fumes disposal hose (1). Install bracket (6) with the bolt from the oil pan of the engine.
Install hose extension (5) and hose clamp (4) onto fumes disposal hose (1) .Note: Ensure that the other end of hose extension (5) is through the hole in the bottom guard.
Install hose clip (3) onto fuel line (2). Install hose clip (7) onto hose extension (5) .
Install hose clip (3), spacer (8), hose clip (7), bolt (9),washer (11), and nut (10) onto bracket (6) .Note: Ensure that the surrounding wiring harnesses and the surrounding hydraulic lines are not touching each other. If necessary, adjust the electrical harnesses and the hydraulic lines.
Install the side panel.