4I6570 GUARD GP-TRACK GUIDE Caterpillar parts
320 L, 325, 325 L, 325 LN, OEMS
Rating:
Alternative (cross code) number:
CA4I6570
4I-6570
4I6570
CA4I6570
4I-6570
4I6570
Weight: 4 pounds 1 kg.
EXCAVATOR, UNDERCARRIAGE,
Compatible equipment models: 4I6570:
Number on catalog scheme:
For full view, you need register
Information:
TYPE="LEVEL" DEPTH="1" @@@-->Turbocharged 3054 Marine Engine
Illustration 1 g00787294
Engine control for the turbocharged 3054 Marine engine (9) Manual stop lever (10) Selection lever for engine speed (RPM) (11) Anchor point for throttle cable (12) Typical throttle cable (13) Run (14) Stop (15) Idle (16) Full speedA throttle cable (12) will need to be installed to the selection lever (10). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the turbocharged 3054 Marine engine. However, a cable for the manual stop lever (9) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Naturally Aspirated 3054B Marine Engine
Illustration 2 g00787293
Engine controls for the naturally aspirated 3054B Marine engine (1) Manual stop lever (2) Selection lever for engine speed (RPM) (3) Anchor point for throttle cable (4) Typical throttle cable (5) Run (6) Stop (7) Idle (8) Full speedA throttle cable (4) will need to be installed to the selection lever (2). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the naturally aspirated 3054B Marine engine. However, a cable for the manual stop lever (1) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Naturally Aspirated 3056 Marine Engine
Illustration 3 g00787305
Engine control for the naturally aspirated 3056 Marine engine (1) Manual stop lever (2) Selection lever for engine speed (RPM) (3) Typical throttle cable (4) Run (5) Stop (6) Idle (7) Full speedA throttle cable (3) will need to be installed to the selection lever (2). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the naturally aspirated 3056 Marine engine. However, a cable for the manual stop lever (1) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Turbocharged Aftercooled 3056 Marine Engine
Illustration 4 g00787291
(8) Selection lever for engine
Illustration 1 g00787294
Engine control for the turbocharged 3054 Marine engine (9) Manual stop lever (10) Selection lever for engine speed (RPM) (11) Anchor point for throttle cable (12) Typical throttle cable (13) Run (14) Stop (15) Idle (16) Full speedA throttle cable (12) will need to be installed to the selection lever (10). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the turbocharged 3054 Marine engine. However, a cable for the manual stop lever (9) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Naturally Aspirated 3054B Marine Engine
Illustration 2 g00787293
Engine controls for the naturally aspirated 3054B Marine engine (1) Manual stop lever (2) Selection lever for engine speed (RPM) (3) Anchor point for throttle cable (4) Typical throttle cable (5) Run (6) Stop (7) Idle (8) Full speedA throttle cable (4) will need to be installed to the selection lever (2). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the naturally aspirated 3054B Marine engine. However, a cable for the manual stop lever (1) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Naturally Aspirated 3056 Marine Engine
Illustration 3 g00787305
Engine control for the naturally aspirated 3056 Marine engine (1) Manual stop lever (2) Selection lever for engine speed (RPM) (3) Typical throttle cable (4) Run (5) Stop (6) Idle (7) Full speedA throttle cable (3) will need to be installed to the selection lever (2). The type of cable and the length of cable will depend on the type of installation and the vessel.A fuel shutoff solenoid is equipped with the naturally aspirated 3056 Marine engine. However, a cable for the manual stop lever (1) should also be installed. This will ensure that the engine can be shut off manually. Refer to the Operation and Maintenance Manual, "Manual Stop Procedure" for information on stopping the engine manually.Note: A mechanical linkage or a cable will need to be installed on the marine transmission. This will enable the selection of the proper gear. Refer to the literature that is provided by the OEM of the transmission.Turbocharged Aftercooled 3056 Marine Engine
Illustration 4 g00787291
(8) Selection lever for engine
Caterpillar SIS machinery equipment:
Caterpillar SIS
CIPI Undercarriages L5E00001-UP (MACHINE) »
4I-6570
GUARD GP-TRACK GUIDE
325, 325L, 325LN EXCAVATORS 2SK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
4I-6570
GUARD GP-TRACK GUIDE
325, 325L EXCAVATOR 2JK00001-UP (MACHINE) »
4I-6570
GUARD GP-TRACK GUIDE
325, 325L EXCAVATOR 8NK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
4I-6570
GUARD GP-TRACK GUIDE
325, 325 L AND 325 LN EXCAVATORS 2SL00001-UP (MACHINE) POWERED BY 3116 ENGINE »
4I-6570
GUARD GP-TRACK GUIDE
320, 320 L, 320 N AND 320 S EXCAVATORS 3XK00822-UP (MACHINE) POWERED BY 3116 ENGINE »
4I-6570
GUARD GP-TRACK GUIDE
325, 325L EXCAVATOR 6RM00001-UP (MACHINE) POWERED BY 3116 ENGINE »
4I-6570
GUARD GP-TRACK GUIDE
325, 325L TRACK TYPE EXCAVATORS 5WK00001-UP (MACHINE) POWERED BY 3116 ENGINE »
4I-6570
GUARD GP-TRACK GUIDE
Caterpillar parts catalog:
Parts guard Caterpillar catalog:
1701674
GUARD GP-MUD
725, D250E II
725, D250E II
3766517
GUARD GP-LOADER FRAME
966H, 972H
966H, 972H
8E9670
GUARD GP-ROCK
D11N, D11R, D11T
D11N, D11R, D11T
3P0525
GUARD GP-RADIATOR HINGED
D6C, D6D
D6C, D6D
5W9775
GUARD GP.-VANDLISM
213B, 214B, 224B
213B, 214B, 224B
2027215
GUARD GP-RADIATOR
924G, 924GZ, 930G, IT28G
924G, 924GZ, 930G, IT28G
2539844
GUARD GP-FAN
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
1919177
GUARD GP-RADIATOR
924G, 924GZ, 930G, IT28G
924G, 924GZ, 930G, IT28G
3077820
GUARD GP-BOTTOM
345D, 345D L, 349D, 349D L
345D, 345D L, 349D, 349D L
1638693
GUARD GP-TRACK ROLLER
572R, 572R II, D7R, D7R II, D7R XR
572R, 572R II, D7R, D7R II, D7R XR
1295640
GUARD GP-BELT
3176C, 3196, C-12, C12
3176C, 3196, C-12, C12