GUARD AS-TRACK GUIDE 4I6571 - Caterpillar

4I6571 GUARD AS-TRACK GUIDE Caterpillar parts 325, 325 L, 325 LN, OEMS

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4I6571
4I-6571
4I6571

Weight: 45 pounds 20 kg.

Buy GUARD AS-TRACK GUIDE 4I6571 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, UNDERCARRIAGE,

This part in 1 request: Show. This information for suppliers only!

#561507 4I6571

2020-11-21

Compatible equipment models: 4I6571:

EXCAVATOR 325 325 L 325 LN

UNDERCARRIAGE OEMS Caterpillar

Number on catalog scheme: 1

Caterpillar 4I6571 Parts scheme GUARD AS-TRACK GUIDE

For full view, you need register

Information:

Illustration 3 g00682255
Remove gasket (6) from housing (7) .
Illustration 4 g00682257
Remove O-ring seal (8) from housing (7) .
Mark the position of check valves (9), (10) and (11) in relation to housing (7). Remove check valves (9), (10) and (11) from housing (7) .
Mark the position of pressure limiting valve (12) in relation to housing (7). Remove pressure limiting valve (12) from housing (7) .
Illustration 5 g00682280
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Note: There is a piston and a spring under plug (13). Carefully remove plug (13) from housing (7) .
Remove plug (13) from housing (7) .
Illustration 6 g00682283
Note: Gasket (15) is made up from a ring and an O-ring seal.
Remove piston (16) and spring (17) from housing (7). Remove gasket (15) from piston (16) .
Remove hex plug (14) and O-ring seal (18) from plug (13). Remove O-ring seal (19) from plug (13) .
Illustration 7 g00682290
Remove three bolts (21) from cover (20) .
Remove cover (20) from housing (7) .
Illustration 8 g00682302
Use a seal pick to remove inner rotor (22) from outer rotor (23) .
Illustration 9 g00682324
Remove outer rotor (23) from shaft (24). Remove ball (25) from shaft (24) .
Illustration 10 g00682413
Remove three balls (26) and three springs (27) from cover (20) .
Illustration 11 g00682425
Reposition cover (20), as shown. Use Tooling (A) to remove retaining ring (28) from cover (20). Remove shaft (25) from cover (20) .
Illustration 12 g00682481
Use Tooling (B) to remove retaining ring (29) from the shaft.
Illustration 13 g00682487
Use Tooling (C) and a press to remove roller bearing (30) from shaft (24) .
Illustration 14 g00682489
Use Tooling (D) to remove the sleeve from bore (31) in housing (7) .
Illustration 15 g00682492
Reposition housing (7), as shown. Use a hammer and a punch to remove the orifice from bore (31) in housing (7) .