GUARD G. 4K3492 - Caterpillar

Removal Procedure
Start By:
Separate the track. Refer to Disassembly and Assembly, "Track - Separate".
Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Guide Bolts M20 - 2.5mm by 100mm 2
B 138-7574 Link Bracket 1
Position the cab out of the way of the final drive.
Illustration 1 g00901390
Raise the machine. Place suitable blocks between the track and the machine. The blocks will allow the final drive sprocket to pass over the top of the track.
Illustration 2 g01286597
Illustration 3 g01286588
Remove two mounting bolts (1) for final drive assembly (4). Install Tooling (A).
Remove one top bolt (2) for sprocket (3). Attach a suitable lifting device and Tooling (B) to sprocket (3). The combined weight of final drive assembly (4) and sprocket (3) is approximately 318 kg (700 lb).
Remove remaining bolts (1) and final drive assembly (4).