GUARD A.-HYD 5A6903 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge 1
B 422-5471 Lifting Eye Assembly 2 Note: Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g03341013
Use a suitable lifting device to position main control valve (8) onto bracket assembly (7). The weight of main control valve (8) is approximately 91 kg (201 lb).
Install the washers and bolts (10).
Illustration 2 g03340128
Illustration 3 g03340878Note: Some components have been removed in the Illustrations for the purpose of clarity.
Use Tooling (B) and a suitable lifting device to position bracket assembly (7) and main control valve (8) onto the machine. The weight of main control valve (8) and bracket assembly (7) is approximately 125 kg (276 lb).
Install the washers and bolts (9). Remove the suitable lifting device and Tooling (B).
Illustration 4 g03339821
Connect all hose assemblies (6).
Illustration 5 g03338227
Connect connector (5). Connect hose assemblies (4). Connect hose assemblies (3).
Illustration 6 g03338024
Install bypass valve (1). Connect hose assembly (2).
Release vacuum and remove Tooling (A). Check the hydraulic level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check".