GUARD AS 5G8707 - Caterpillar

Removal Procedure
Start By:
Remove the left engine guard. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00742138
Shut off the fuel supply at the fuel tank.
Loosen clamp (3) and remove the inlet hose from priming pump (1) .
Remove tube assembly (2) from priming pump (1) .
Cut the wire strap and remove wiring harness (4) .
Remove bolts (5). Remove priming pump (1) from the engine.Installation Procedure
Illustration 2 g00742138
Put priming pump (1) in position on the engine. Install bolts (5) .
Install wiring harness (4) .
Connect tube assembly (2) to priming pump (1) .
Install the inlet hose to priming pump (1). Tighten clamp (3) .
Turn on the fuel supply.End By: Install the left engine guard. Refer to Disassembly and Assembly, "Engine Side Guards - Remove and Install".