GUARD G-CRANKC 5H3910 - Caterpillar

Illustration 1 g02567536Note: All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bucket, and the cylinder pin bores.
Table 1
Specification for 359-5616 Hoe Stick Gp
Item Qty Part Specification Description
1 4 166-1496 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
2 4 228-5617 Bushing Install the bushing in the bore so that the part number of the bushing is facing outward.
Inside diameter before assembly is 100.29 0.04 mm (3.948 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).
3 1 4I-4618 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
4 1 4I-4809 Pin As Diameter is 79.850 0.025 mm (3.1437 0.0010 inch).
5 2 235-7679 Lip Type Seal Lubricate the sealing lip of the lip type seals lightly with the lubricant that is being sealed. Install the dust seal so that the lip faces outside, as shown. Install the lip type seals so that the lip type seals do not extend beyond the face of the boss.
6 2 241-7231 Bushing Install the bushing in the bore so that the part number of the bushing is facing outward.
Inside diameter before assembly is 70.17 0.04 mm (2.763 0.002 inch).
Installation depth is 9.5 0.8 mm (0.37 0.03 inch).